The rack must be installed firmly and correctly. The installation of cone crusher is similar with the crusher cycle rack. Before demolishing the old rack, we should measure the central location and elevation of old crusher, and the elevation of new rack should be less than 2 mm. the new rack elevation should be not less than the old rack elevation, or above 1.5 mm. Before installing the new rack, please clear the second water layer, and then sit it down the base with plate in the bottom in order to adjust the levelness of the crusher.
When the sensor is installed on detected objects or entering the medium to be measured, it will absorb energy or interference from the object and the medium. The physical quantity to be measured is deviation from true value, thus making it impossible to achieve the desired measurements, this is known as load characteristic of testing device (load effect). (Source: Levi Strauss & Co. President). Load effect occurs not only between the sensor and the measured objects, but exists between two stages of measuring device. Load effect of measuring instruments has its inherent characteristics. Therefore, when design and build systems, we have to consider its measurement impact reduces to the minimum, so as to improve test accuracy. Load characteristics of the production machinery can be divided into three kinds of situations: no relationship of load torque and speed; ratio change of speed and load torque; the speed changes quadratic equations proportion with load torque. The verticality should correspond with the requirements of drawing. If the deviation is too large, the rack is wrong, and should be amended.
Otherwise, it will affect the working of eccentric parts and dustproof devices. When the position is adjusted, we should fasten and tighten each bolt and plate. After the installation of all parts, do the secondary pouring. Just cast the top 200-400 mm of anchor bolt. The bottom bolt hole should be blocked by oiled cotton, yarn and other fabrics. We network Star provide Professional technology, excellent product quality and intimate after-sales service when you purchase products from our company. As a professional mining machinery exporter, we will win your trust with our delivery speed, and product quality credit enterprises.